Ocean Blue 400200 - Assembly Instructions; Tools, Parts, and Hardware List

- 1 -
Ocean Blue A-Frame Ladder
for above ground pools
Tools Needed for Assembly
■ Rubber Mallet
■ Cordless Drill w/Phillips
Driver
■ 5/16” Drill Bit
■ Phillips Screwdriver
Parts List
■ 4 - Side Rails
■ 4 - Handrails
■ 1 - Platform
■ 2 - Right Adjustable Rail Boot
■ 2 - Left Adjustable Rail Boot
■ 2 - Swing-up Rails
■ 3 - Swing-up Treads
■ 1 - Bottom Swing-Up Tread
■ 6 - Fixed Ladder Treads
■ 1 - Anti-Swim Barrier
■ 1 - Anti-Swim Barrier Extension
■ 1 - Fixed Ladder Tread
■ 1 - Hardware Safety Pack
Hardware Bag
■ 20 - 1/4-20 hex nuts
■ 2 - 1/4-20 x 1.25” Philips pan
head screws
■ 8 - 1/4-20 x 1.5” Philips pan head
screws
■ 8 - 1/4-20 x .625” Philips pan
head screws
■ 4 - 1/4-#10 x .75” Philips self-
tapping screws
■ 2 - 1/4 - 20 x 3-1/2” Bolts
■ 2 - 1/4” Flat Washers
■ 1 - Strip of Foam Pads (4 pads)
■ Instructions
■ Warning Labels
■ Padlock
4 – Handrails
2 – Swing-up Rails
1 - Platform
6 - Fixed Ladder
Treads
2 - Right
Adjustable
Rail Boots
1 - Anti-Swim
Barrier
1 - Bottom
Swing-Up Tread
3 - Swing-up
Treads
1 - Hardware/Safety Pack
1 - Anti-Swim
Barrier Extension
2 - Left Adjustable
Rail Boots
4 - Side Rails
ASSEMBLY INSTRUCTIONS - PLEASE READ BEFORE ATTEMPTING ASSEMBLY