KITE MANUAL
12 13
BACK LINE BACK LINEFRONT LINEFRONT LINE
2018 (or newer) OR KITE with 2017 (or older) OR BAR
In order to use a 2017 or older Ocean Rodeo bar you must rst install the OR Bar Bridle
Adapter Kit (which can be purchased from a dealer or directly from Ocean Rodeo) to
the bridles on the kite. This will change the bridles so that the front attachments have
knots and the back attachments have loops. Thus making it compatible with the older
model bars.
Attach the OR Bar Bridle Adapters to the front and back bridle attachments on the kite
using a loop to loop connection. When connecting the flying lines to the adapters use
a larks head knot.
BACK LINE BACK LINEFRONT LINEFRONT LINE
USING 2018 (or newer) OR KITE with 2018 (or newer) OR BAR
Pigtails on front and back ying lines should all be the same length (20cm). These will
stay attached to your flying lines with a loop to loop connection. When connecting the
pigtails to the kite use a larks head knot.
Note:
For 2018 kites we have changed the bridles on our kites so that the front attachments
have loops and the back attachments have knots. This has been done so that our kites
will match the industry standard.
KITE
BAR
20cm PIGTAILS
BAR BRIDLE ADAPTERS
KITE
BAR
To Next Page
Loading...
