Need help?Do you have a question about the Ocean Signal rescueME PLB3 and is the answer not in the manual?
General| Brand | Ocean Signal |
|---|---|
| Model | rescueME PLB3 |
| Category | Marine Equipment |
| Language | English |
Step-by-step guide for manually activating the PLB in emergency situations.
Details the global satellite system used for distress alerts and location.
Explains the service confirming distress signal receipt by the Cospas-Sarsat system.
Describes the Automatic Identification System for vessel alerts and proximity detection.
Provides an overview of the PLB3's design, purpose, and key technologies.
Information on compliance with radio frequency exposure limits.
Crucial safety precautions, battery handling, and operational restrictions for the PLB3.
Describes the automatic activation process when the PLB3 is fitted to a life jacket.
Step-by-step guide for manually activating the PLB3 in an emergency situation.
Explains the meaning of LED and strobe light signals during activation.
Details LED signal patterns for RLS-enabled units during operation.
Explains LED signal patterns for units without RLS functionality.
Instructions on how to turn off the PLB3 after activation or accidental use.
How AIS messages from the PLB3 are displayed on other vessels.
Step-by-step guide for using the rewind tool to coil the antenna.
Procedures for accidental activations and information to report.
Guide on performing a functional self-test to check the PLB3's operational status.
Instructions for testing the PLB3's Global Navigation Satellite System receiver.
Emphasizes the mandatory requirement to register the PLB with the National Authority.
Provides contact details and websites for beacon registration in various countries.
Steps to safely remove the activation slider from the PLB3 for installation.
Instructions on how to tether the PLB3's small parts to prevent loss.
Detailed steps for attaching the activation tape to the slider mechanism.
Guide on correctly inserting the activation slider back into the PLB3.
Instructions for fitting the bracket that secures the PLB3 to a life jacket's oral tube.
Explains configuration details marked on product labels and registration requirements.
Guidance on cleaning, care, and common issues with the PLB3.
Details on battery type, life, replacement procedures, and safety warnings.
Instructions on safely decommissioning and disposing of the PLB3 unit.
Guidance and regulations for shipping the PLB3 unit.
Detailed technical data for the PLB3's transmitters, receiver, and environmental specs.
Lists regulatory approvals and country-specific intended use information.
Details the limited and extended warranty terms for the PLB3 product.
To Next Page
