What to do if the “Add water” indicator light is on in my Ocina KULA-RZB12(B)-N8-1 Ice Maker?
If the “Add water” indicator light is illuminated on your Ocina Ice Maker, it could be due to a lack of water. Simply add water to the unit to resume ice making. Alternatively, the bottom of the water tank might be blocked, so cleaning it may solve the issue.
Why are ice cubes sticking together in my Ocina KULA-RZB12(B)-N8-1 Ice Maker?
Ice cubes may stick together in your Ocina Ice Maker if the ice-making cycle is too long. To resolve this, stop the ice-making process, allow the ice cubes to melt, and then restart the ice maker, selecting the small ice option. Also, check the water temperature; if it's too low, replace the water in the tank with water between 8°C and 32°C.
Lists critical safety warnings and precautions for using the ice maker to prevent hazards and damage.
Description of the main ice cube maker device and its external components.
Details of the ice basket and the ice spoon accessory.
Outlines the technical details of the ice maker, such as item number, size, power, and capacity.
Explains the layout and function of the control panel buttons for operating the ice maker.
Step-by-step guide on how to operate the ice maker, including setup, water filling, and ice making.
To Next Page
General