Need help?Do you have a question about the Oclean Air 2 and is the answer not in the manual?
General| Battery type | Built-in battery |
|---|---|
| Power source | Battery |
| Input voltage | 5 V |
| Battery voltage | 3.7 V |
| Power consumption (typical) | 2.5 W |
| Number of brush heads included | 1 pc(s) |
| Purpose | Adult |
| Brush shape | Oval |
| Product color | Pink |
| Toothbrush type | Oscillating toothbrush |
| Mobile app support | - |
| Teeth brushing modes | Deep clean |
| Number of teeth brushing modes | 2 |
| Toothbrush frequency (pulsations) | - movements per minute |
| International Protection (IP) code | IPX7 |
| Toothbrush frequency (oscillations) | 80000 movements per minute |
Weight and Dimensions| Width | 23 mm |
|---|---|
| Height | 235 mm |
| Weight | 95 g |
Start the toothbrush by short pressing the power button. It automatically shuts down after a 2-min plan.
Switch between Standard and Deep Cleaning modes by long pressing the power button for 2s.
Charge when the red indicator is on. White light indicates charging status; solid white for full charge.
Dentists recommend 2-3 minutes per brushing. Diagram shows time allocation for different tooth areas.
Insert brush head with a 0.5mm gap. Apply toothpaste and turn on the toothbrush in mouth to prevent splashing.
Position bristles at 45° from gum line. Move slowly in a circular motion, without pressing too hard.
Gargle with clean water after completing the brushing session.
Details product name, model, power, charging standards, battery life, capacity, and charging time.
Describes charging indicator behavior (flashing/solid white) and low battery red flashing.
Guidance for first use charging and notes on battery replacement, disassembly, and charger compatibility.
Clean brush head after use and air dry. Do not pull bristles to prevent deformation.
Wash body with water, wipe with soft cloth, air dry. Avoid sharp objects on sealing ring.
Wipe charger with a soft cloth. Replace brush head every 2-3 months as recommended by dentists.
Address weak vibrations by checking brush head fit and pressure against teeth.
Resolve short operation time by cleaning the charger cradle or charging for a longer period.
Troubleshoot product failure, typically caused by insufficient battery power.
To Next Page
