EasyManua.ls Logo

Ocmis Irrigazione MRR - User Manual

Default Icon
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
30/11/2015
EN
Models:
MR - MR/1
Models:
MRR - R1AT15
INSTRUCTIONS AND WARNING MANUAL
HOSE REEL TRAVELLING RAINGUNS
MUMR-R1.02 .EN

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Ocmis Irrigazione MRR and is the answer not in the manual?

Summary

General Information and Manual Symbols

Safety Rules in the Manual

Defines behavior and obligations for safe operation across various activities.

Technical Specifications and Layout

Technical Data

Provides technical data including machine weights and dimensions.

Computer Controls

Details the function of computer control buttons, sensors, and communication modules.

Machine Description

Intended Use

Specifies the intended agricultural use of the machine for irrigation.

Unauthorised Use

Lists forbidden uses that may cause damage or hazards.

Safety

Personnel Training

Emphasizes the need for trained personnel for installation, use, and maintenance.

Intended Uses and Application Limits

Specifies intended uses and material limitations, disclaiming liability for misuse.

Hazardous Areas

Identifies hazardous areas and requirements for delimitation and access control.

Safety Devices Applied to the Machine

Details the safety devices installed on the machine.

Residual Risks

Identifies and addresses various residual risks associated with machine operation.

Additional Danger Warnings

Provides critical warnings related to high pressure, oil, and machine condition.

Electrocution Hazard

Warns about electrical hazards and safe distances from power lines.

Risks Connected with the Battery

Details hazards associated with battery acid and explosive gases.

Installation

Loading, Unloading, Lifting and Handling Procedures

Provides essential procedures and precautions for safe loading, unloading, lifting, and handling.

Assembly and Placement

Warns about tilting, hitting hazards, parking, and road travel requirements.

Checks and Inspections Prior to Starting Up

Lists pre-startup checks for mechanical assemblies and safety systems.

Use and Operation

Check Prior to Starting Work

Details pre-work checks including visual inspection and functional tests.

Test on Machine Stop for Raingun Trolley Stroke End

Tests for machine stop, trolley hitching, and loading procedures.

Removal for Placement in the Field

Provides instructions for placing the machine in the operating field.

Checks Before Starting Irrigation

Checks to be performed with unwound hose and prior to starting irrigation.

Starting Work

Procedures for starting the machine and adjusting operating parameters.

Quick Hose Winding

Instructions for rapidly rewinding the hose.

End of Work and Preparing to Tow

Procedures for ending work and preparing the machine for towing.

Troubleshooting for Motor Pump

Lists common issues and diagnostic steps for the motor pump unit.

Maintenance

General Safety Precautions for Maintenance

Outlines safety precautions to avoid injuries and damage during maintenance.

Danger Notes during Maintenance

Series of danger notes indicating potential fatal injury hazards during maintenance.

Maintenance Plan

Recommends organising maintenance activities into technical sheets.

Troubleshooting - Diagnostics - Solutions

List of Failures - Causes - Solutions

Table listing potential failures, their causes, and corrective actions.

Spare Parts

Ocmis Irrigazione MRR Specifications

General IconGeneral
CategoryFarm Equipment
Working WidthUnknown
Working DepthUnknown
Required Tractor PowerUnknown
WeightUnknown
Number of RotorsUnknown

Related product manuals