Product Electrical Specifications
Component Rating Frequency
Peak Output
Power
Headset 5VDC, 750mA
2.404-2.478 GHz 1.81 mW
Sensor 5VDC, 250mA
Touch 5VDC 2.404-2.478 GHz 2.94mW (EIRP)
Battery (Touch)
1.5VDC (2 – AA Alkaline,
1 for each device)
Not Applicable Not Applicable
Health and Safety
* These health & safety warnings are periodically updated for
accuracy and completeness. Check www.oculus.com/warnings
for the latest version.
HEALTH & SAFETY WARNINGS: TO REDUCE
THE RISK OF PERSONAL INJURY, DISCOMFORT
OR PROPERTY DAMAGE, PLEASE ENSURE
THAT ALL USERS OF THE HEADSET READ THE
WARNINGS BELOW CAREFULLY BEFORE USING
THE HEADSET AND TOUCH CONTROLLERS.
Before Using the Headset and Touch controllers
• Read and follow all setup and operating instructions provided with
the headset and Touch controllers.
• Review the hardware and software recommendations for use of the
headset and Touch controllers. Risk of discomfort may increase if
recommended hardware and software are not used.
• Your headset, Touch controllers and software are not designed for
use with any unauthorized device, accessory and/or software. Use
of an unauthorized device, accessory and/or software may result in
injury to you or others, may cause performance issues or damage
to your system and related services.
• To reduce the risk of discomfort, adjust the inter-pupillary distance
(IPD) for each user before use of the headset, and check the
settings before resuming use after a break, to avoid any unintended
changes to settings.
To Next Page
Loading...
