Inspect the level of the brake fluid before each operation. If the fluid level is
low add DOT 4 brake fluid only.
After opening a bottle of brake fluid, always discard any unused
portion. Never store or use a partial bottle. Brake fluid is
hygroscopic, meaning it rapidly absorbs moisture from the air. The
moisture causes the boiling temperature of the brake fluid to drop,
which can lead to early brake fade and the possibility of accident or
Change tile brake fluid every two
year any time the fluid becomes
contaminated, the fluid level is
below the minimum, or if the type
and brand of the fluid in the,
Access the brake fluid reservoir
through the left front wheel well.
1. Position the vehicle on a level
2. Place the transmission in neutral.
3. View the brake fluid level in the
reservoir. The level should be
4. Apply the brake forcefully for a few seconds and check for fluid
leakage around the fittings.
To Next Page
Loading...
Need help?
General
