Follow these procedures when transporting the vehicle.
1. Place the transmission in neutral. Set the parking brake.
3. Turn the fuel valve off.
4. Remove the key to prevent loss during transporting.
5. Secure the fuel cap and seats.
NOTICE: Always tie the frame of the Yours vehicle to the transporting unit
securely with suitable straps or rope. Do not attach tie straps to the
front control arm bolt pockets.
6. Wrap the front tie strap through the frame tubes, or attach a tie-down
hook around each of the tubes.
7. Wrap the rear tie strap around the swing arm.
To Next Page
Loading...
Need help?
General
