Seats
Driver’s Seat Adjustment
1.Lift the seat latch lever located
under the right front edge of the
2. While holding the lever
upward, slide the seat forward
or rearward to the desired position,
3. Slide the seat forward and rearward
to ensure the latch is engaged.
Before operating the vehicle,
always make sure both seats are
1.To remove the driver's seat, lift
2. While holding the lever upward,
slide the seat completely forward
to remove it from the seat mounting
3. Before operating the vehicle, always
make sure the driver's seat is
installed and securely latched.
4. To remove the passenger seat,
remove the two bolts located at
the front of the seat mounting rails. Slide the seat forward to remove
it from the vehicle. Always reinstall the passenger seat before operating
the vehicle. After reinstalling the seat and bolts, torque the nuts to 10 ft.
To Next Page
Loading...
Need help?
General
