Failure to inspect and verify that the vehicle is in safe operating condition
before operating increases the risk of an accident. Always inspect the vehicle
before each use to make sure it's in safe operating condition.
Brake system/pedal travel
Inspect, lubricate if necessary
Inspect, lubricate if necessary
Inspect condition and pressure
Inspect, ensure fastener tightness
Frame nuts, bolts, fasteners
Inspect, ensure tightness
Remove grass and debris from the
vehicle, especially on the underside
and near the exhaust system
Indicator lights/switches
Inspect, clean or replace
Move the seats forward and
rearward to ensure correct
installation
Check length of belt for damage,
check latches for proper operation
Check for wear or damage, ensure
proper installation
To Next Page
Loading...
Need help?
General
