To Next PageTo Next Page
Need help?Do you have a question about the Odom Echotrac CV100 and is the answer not in the manual?
Details the technical specifications of the Echotrac CV, including frequency, power, and interfaces.
Details the DC power requirements and connection for the Echotrac CV.
Describes the functionality and use of the Echotrac CV's serial ports for data and communication.
Covers the physical setup and interconnection of the Echotrac CV unit.
Details the correct sequence for powering on the Echotrac CV and associated peripherals.
Provides crucial information on mounting transducers for optimal echo sounder performance.
Explains the process of installing a transducer through the vessel's hull.
Describes the installation of a transducer within a vessel's sea chest.
Details the method for mounting a transducer over the side of the vessel.
Lists important factors and best practices for calibrating the Echotrac CV.
Explains the principle and process of calibrating the Echotrac CV for accurate depth measurements.
Provides a step-by-step guide on performing a bar check for calibration.
Offers guidance on optimizing Echotrac CV performance in shallow water conditions.
Offers steps to diagnose and resolve issues when the Echotrac CV is not functioning.
Guides on upgrading the firmware for the Echotrac CV's Motorola processor.
Provides instructions for upgrading the firmware of the Echotrac CV's DSP processors.
General