Last
update:
2019/03/05
10:03
accessory:connectivity:wifi:wireless_ap_mode https://wiki.odroid.com/accessory/connectivity/wifi/wireless_ap_mode?rev=1551747785
https://wiki.odroid.com/ Printed on 2023/05/21 14:24
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=
0
wmm_ac_bk_acm=
0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=
0
wmm_ac_be_acm=
0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=
0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=
0
### TX queue parameters
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=
0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=
0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
Note: On the Wifi module 4 and Wifi moudule 5, Wifi module 5A, we need to tune these setting
depending on the ht_capab.
Note: Replace the country_code, ssid, and wpa_passphrase as per your requirement.
Note: N-WLAN is optional that can be dropped out.
Step 4-2: Check your hostpad & dnsmasq service status
To Next Page
Loading...