14 English
ADDITIONAL AND SERVICE SETTINGS
All additional settings can be accessed through the menu. Data and
parameters are located in ve groups in the menu:
t1 - measured and set temperatures,
d1 - data on room unit and heating controller,
P1 - user settings (parameters),
P2 - user settings (parameters)
S1 - service settings (parameters).
Press the key for 2 seconds, to enter the menu. Move between groups
by using the keys and .
The replace function can be turned o the set time by pressing the key
for 10 seconds.
Press the key , to activate the selected group.
Menu symbol
Information or parameter value
display for setting
Group name display and consecutive
parameter number
By pressing , any setting can be terminated at any time,
and you can return to the basic display.
To Next Page
Loading...