Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing
all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.
Please retain instructions for future reference.
Operating Instructions and Parts Manual 24417
06/16
2016 OEMTOOLS
HEAVY DUTY MINI AIR
SURFACE PREP SANDER KIT
The following safety information is provided as a guideline to help you operate your Mini Air Surface Prep Sander under the safest possible conditions.
Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The
following safety instructions are to provide the user with the information necessary for safe use and operation. Please read and retain these instructions
for the continued safe use of your tool. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that
uses the equipment understands and follows these safety instructions as well.
WARNING
Explanation of Safety Signal Words
Thank you very much for choosing an OEMTOOLS Product!
For future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin
using it. This tool is designed for certain applications only. OEMTOOLS cannot be responsible for issues arising from modification. We strongly
recommend this tool is not modified and/or used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the tool until you have first contacted customer service to determine if it can or should be performed
on the product.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
NOTES: Provide clarity and helpful information.
UNPACKING
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a shipping damage
claim must be filed with carrier. Do not use the OEMTOOLS
®
Mini Air Surface Prep Sander if broken, bent, cracked or
damaged parts (including labels) are noted. Any Mini Air Surface
Prep Sander that appears damaged in any way, operates
abnormally or is missing parts should be removed from service
immediately. If you suspect that the Mini Air Surface Prep
Sander was subjected to shock load (a load that was dropped
suddenly, unexpectedly, etc.) immediately discontinue use until
it has been checked by a factory authorized service center.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
To Next Page
Need help?
General
