OEM Tools 24607 - Important Instructions and Product Specifications; Safety Rules and Usage Guidelines; Flashlight Specifications; Ultra Slim Inspection Light Specifications

2
Operating Instructions and Parts Manual 24607
09/16
2016 OEMTOOLS
®
PRO RECHARGEABLE FLASHLIGHT
WITH DUAL FUNCTION LED AND
UV INSPECTION LIGHT
ULTRA SLIM INSPECTION LIGHT
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your flashlight. Read this manual carefully. Learn the
flashlight’s applications and limitations, as well as, potential
hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work
areas invite accidents.
3. Keep children away. All children should be kept away from
the work area. Never let a child handle a tool without strict
adult supervision.
4. Use safety equipment. Eye protection should be worn at all
times when working this light tool. Use ANSI approved safety
glasses. Everyday eyeglasses are NOT safety glasses. Dust
mask, non-skid safety shoes, hard hat or hearing protection
should be used in appropriate conditions.
5. Do not use the flashlight if the switch does not turn it on
and off. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
6. Check for damage. Check your flashlight and batteries
regularly. If part of the flashlight is damaged it should be
carefully inspected to make sure that it can perform its
intended function correctly. If in doubt, the part should be
repaired or replaced.
7. Keep away from flammables. Do not attempt to operate this
flashlight near flammable materials or combustibles. Failure
to comply may cause serious injury or death.
PRODUCT SPECIFICATIONS
• Lightweight, anodized aluminum housing
• Charge time: 5 Hours
• Accessories: USB Charging Cord, AC Adapter, (1) 18650 Rechargeable Battery and Magnetic 180° Swivel Hook
FLASHLIGHT
Mode 100% 30% 10% Strobe S.O.S.
Output 500 150 55 / /
Runtime 3.5 Hours 6 Hours 20 Hours / /
Beam Distance 170m /510 ft.
Impact Resistant 1m
Dimensions 6.5” Length 1.3” Diameter 1.1” Head
Mode 100% 30% 10% Strobe S.O.S.
Output 450 125 40 / /
Runtime 3.5 Hours 6 Hours 20 Hours / /
Beam Distance 30m /90 ft.
Impact Resistant 1m
Dimensions 7.9” Length 0.9” Diameter 1.2” Head