OEM Tools 25980 User Manual

UNPACKING
After unpacking, inspect carefully for any
damage that may have occurred during
transit. Check for loose, missing, or
damaged parts. If any damage is observed,
a shipping damage claim must be filed
with carrier. Do not use the work light if
it appears damaged in any way, operates
abnormally or is missing parts.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others
by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or
damage to product or property. Please retain instructions for future reference.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
The following safety information is provided as guidelines to help you operate your work light under the safest possible conditions. Any
tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed.
The following safety instructions are to provide the user with the information necessary for safe use and operation. Please read and
retain these instructions for the continued safe use of your work light. Failure to follow instructions listed below may result in serious
injury. In addition, make certain that anyone that uses the equipment understands and follows these safety instructions as well.
Operating Instructions and Parts Manual 25980
200
LUMENS
0
Work Light Torch Light
MAX OUTPUT
100
LUMENS
Work Light Torch Light
MAX RUNTIME
4h
4h
CREE 3
W RECHARGEABLE
LITHIUM-ION POCKET LIGHT
WARNING
Thank you very much for choosing an OEMTOOLS Product!
For future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. We strongly recommend this work light is not modified and/or used for any application
other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
work light until you have first contacted OEMTOOLS to determine if it can or should be performed on the product.
10/15
2015 OEMTOOLS

OEM Tools 25980 Specifications

General

Brand	OEM Tools
Model	25980
Category	Flashlight
Language	English

Summary

Product Unpacking and Safety

Unpacking Instructions

Inspect the product carefully for any damage that may have occurred during transit.

Safety Alert Symbol and Precautions

Explains the safety alert symbol and provides guidelines for safe operation to avoid injury or death.

Important Instructions and Safety Rules

General Safety Awareness

Know your work light, keep children away, and never stare directly into the beam.

Safe Operation and Handling

Do not use if switch fails, keep away from flammables, and use only provided charging cable.

Maintenance and Repair Safety

Use only identical replacement parts and follow maintenance instructions to avoid injury.

Operator Responsibility and Common Sense

Operator must supply common sense and caution as manual cannot cover all conditions.

Disposal and Charging

Product and Battery Disposal

Dispose of components according to regulations and return batteries for recycling.

Charging Instructions

Fully charge the battery before first use.

Operation, Maintenance, Specifications, and Features

Product Operation Overview

Describes compact design, LED types, on/off button, magnetic clip, and rechargeable battery.

Maintenance Guidelines

Store in a protected area, keep clean, inspect cable, and recharge periodically.

Product Specifications

Lists key specifications including lumens, runtime, charge time, and weight.

Key Features

Highlights features like magnetic clip, indicator lights, durable case, PC lens, and ergonomic grip.

Parts Identification

Component Diagram and Descriptions

Illustrates front and back views of the pocket light with labels for SMD lights, buttons, and ports.

Parts List

Provides a list of components including SMD Lights, On/Off Button, Cree 3W Light, Magnetic Pocket Clip, and Charging Port.

Repair and Replacement Disclaimer

States that repairs should be done by certified technicians and buyer assumes risk for parts replacement.