OEM Tools 25982 - User Manual

UNPACKING
After unpacking, inspect carefully for any
damage that may have occurred during
transit. Check for loose, missing, or
damaged parts. If any damage is observed,
a shipping damage claim must be filed
with carrier. Do not use the work light if
it appears damaged in any way, operates
abnormally or is missing parts.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others
by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or
damage to product or property. Please retain instructions for future reference.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
The following safety information is provided as guidelines to help you operate your work light under the safest possible conditions. Any
tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed.
The following safety instructions are to provide the user with the information necessary for safe use and operation. Please read and
retain these instructions for the continued safe use of your work light. Failure to follow instructions listed below may result in serious
injury. In addition, make certain that anyone that uses the equipment understands and follows these safety instructions as well.
Operating Instructions and Parts Manual 25982
210
ME S
O
Work Light Top Light
MAX RUNTIME
3h
20h
Work Light Top Light
MAX OUTPUT
210
LUMENS
20
LUMENS
MAGNETIC RECHARGEABLE
LED WORK LIGHT
WARNING
Thank you very much for choosing an OEMTOOLS Product!
For future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. We strongly recommend this work light is not modified and/or used for any application
other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
work light until you have first contacted OEMTOOLS to determine if it can or should be performed on the product.
10/15
2015 OEMTOOLS

Summary

Unpacking and Initial Inspection

Important Instructions and Safety Rules

Know Your Work Light

Read the manual to understand applications, limitations, and specific hazards of the work light.

Child Safety

Keep children away from the work area and never let them handle tools without strict adult supervision.

Switch Functionality

Do not use the work light if the switch does not operate correctly, as it is a safety hazard.

Flammable Material Hazard

Keep the work light away from flammable materials to prevent serious injury or death.

Eye Protection

Avoid staring directly into the work light beam to prevent potential eye damage.

Charging Procedure

Only attempt to recharge the battery using the provided USB cable.

Servicing and Parts

Use only identical replacement parts when servicing; unauthorized parts may pose injury risks.

Operator Responsibility

Operators must use common sense and caution, as these factors cannot be built into the product.

Maintenance and Care

Storage Guidelines

Store the work light in a protected area away from inclement weather and harmful elements.

Cleaning

Keep the work light clean by wiping it with a damp cloth.

Cable Inspection

Periodically inspect the cable for damage and replace if necessary.

Battery Recharge

Recharge the battery periodically when the work light is not in use.

Disposal and Charging

Product Disposal

Dispose of components according to all state, federal, and local regulations at the end of its useful life.

Battery Disposal Guidelines

Dispose of batteries according to regulations; do not dispose of in fire due to explosion risk.

Initial Charging

Fully charge the battery before the first use.

Operation Overview

Parts List and Diagram

OEM Tools 25982 Specifications

General

Bulb Type	LED
Rechargeable	Yes
Light Type	Work Light
Power Source	Battery
Battery Type	Lithium-Ion
Charging Time	4 hours
Water Resistance	IPX4
Color	Black