Need help?Do you have a question about the OEM 500 and is the answer not in the manual?
Explains the purpose and function of each control and connection port.
Details stereo, LFE, and AC power connection methods for the amplifier.
Provides guidance on subwoofer placement and room acoustic effects.
Step-by-step guide for optimizing audio blend using key controls.
Details Subsonic Filter, Crossover Bypass, and Auto Power mode settings.
Explains the purpose and function of each control and connection port.
Details stereo, LFE, and AC power connection methods for the amplifier.
Provides guidance on subwoofer placement and room acoustic effects.
Step-by-step guide for optimizing audio blend using key controls.
Details Subsonic Filter, Crossover Bypass, and Auto Power mode settings.
General| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | >100dB |
| Type | Power Amplifier |
| Power Output (4 Ohms) | 500W per channel |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 20k Ohms |
| Weight | 4.5kg |
| Dimensions | 483mm x 44mm x 300mm |
To Next Page