OEM TA298 - User Manual

To Next Page

TA298 indoor and outdoor temperature hygrometer manual

Uses:This product is suitable for,factories,warehouses,

building air conditioning management,hospitals,aquaculture

species,room,office,hotel,laboratory....Modern energy

saving good helper.

The machine can be hung on the wall or on the table,on

the back there is a hook and bracket

Measuring range:outdoor -40C~70(-40~158F)

degree of error:0.1c(0.1c)

Indoor0C-50(32F~122"F)

Humidity 10%~99%土 5%Resolution 1%

Function Test:Press MAX/MIN key once to display the

previous maximum/minimum indoor and outdoor

temperature and humidity values

When the MAX/MIN press the RESET button once to clear a

previously memorized maximum or minimum Remeasure

When the MAX/MIN 8 seconds after the display returns to

the current temperature and humidity display C/F key

Celsius and Fahrenheit Conversion

Time Debugging:

1 In the initial state,press and hold[MODE] for 2 seconds,

the number of minutes the current time starts flashing,press

the[ADJ] to adjust the hours,minutes.In normal time display

mode,press the[ADJ]can be converted to 12/24 show.

2 In the current clock mode(clock and minutes between

two blink once per second),press[MODE]once,switch the

display to alarm mode(clock and minutes between two points

is not flashing),press live[MODE]for 2 seconds,the alarm

time flashes,press the [ADJ]can adjust the alarm time,minute.

Alarm mode is displayed,press[ADJ] to set/cancel the alarm

alam function.After setting press the[MODE]returns to normal

time display.

This product uses 1.5v AAA batteries Extemal 1.5 m water

temperature sensors

*Fonts appear blurred,replace the battery.

Need help?

Do you have a question about the OEM TA298 and is the answer not in the manual?

Summary

Device Specifications

Measuring and Accuracy

Specifies measurement range for outdoor and indoor temperature and humidity, and degree of error.

Functionality and Operation

MAX;MIN Value Display

Press MAX/MIN to display previous max/min indoor/outdoor temperature and humidity values.

Clearing Memorized Values

Press RESET button to clear previously memorized maximum or minimum measurements.

Temperature Unit Conversion

Converts displayed temperature between Celsius and Fahrenheit.

Time and Alarm Settings

Setting Current Time

Adjusts hours and minutes, and switches between 12/24 hour format.

Setting Alarm Time

Adjusts alarm time and minute, and sets/cancels the alarm function.