EasyManua.ls Logo

Oemtools 24356 - General Safety Warnings; Operating Safety; Usage and Storage; Hazardous Material Precautions

Default Icon
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Read and follow operating instructions and warnings and familiarize yourself with
the torch before lighting or using. Review instructions and warnings periodically to
maintain awareness.
- Keep the burner out of the reach of children.
- Extremely flammable contents under pressure.
- Maintain good ventilation.
- Always wear goggles and protective gloves and use proper tools to handle
hot work.
- Never breathe in welding/soldering fumes.
- Do not puncture or incinerate.
- Never attempt to modify the torch construction, use unapproved accessories
or fuels or attempt to repair a damaged torch.
- Do not drop the micro torch as the unit might be damaged and ceramic could
be broken.
- Never store at temperature above 45°C such as in a car or prolonged
sunlight.
- Follow refilling procedure to avoid serious accidents.
- Do not ignite the torch near to the face, hands, clothing or inflammable
materials.
- Please note the butane flame may be barely visible in certain light conditions.
- Allow the micro torch to cool down before storage.
- Ensure flame is extinguished and gas is off after each use.
- Never attempt to use torch as a cigarette lighter.
- Be extra careful when using the torch outdoors on sunny or windy days.
- Wind may carry the torch’s heat back toward you or other areas not intended
to be heated.
- Never use a torch to remove lead-based paint indoors or in any confined
area.
- Always check to make sure no intended parts or materials are being heated.
- Whenever there is a possibility that unintended material has been heated,
wait at least two hours before leaving the area.
- Be especially careful to avoid fumes from cadmium, plating and galvanized
metal.
- Beware that the torch tip and accessories get hot during use.
- Be sure not pointed in a direction which would cause nearby objects to
ignite.
- Heating these is extremely dangerous, especially after they have been
“emptied”.
- Always have a fire extinguisher and a bucket of water near the torch and
work area.
- Do not use water to cool down the torch; it will hurt the product.
- Store and transport the container upright.
- After use, please wait 2 minutes until confirming the torch extinguished and
cooled down.