Oemtools 24356 User Manual

24356 - Professional 3-in-1 Butane Micro Torch Kit
INSTRUCTIONS:
Please read following safety and operational information thoroughly before using
the Micro Torch.
IGNITION & EXTINGUISHING
1. Center the gas adjustment dial between the “-” and “+” signs.
2. Release the child resistant latch by using your thumb and sliding it down and
make sure the resistant latch is locked.
3. Ignition: Hold the torch in your hand and use your thumb to press and hold down
the trigger. (It may take two or three tries before the torch ignites.) Each try will
require sliding down the child resistant latch, then pressing trigger again.
4. For a continuous flame, move the continuous/off switch to right before releasing
the trigger.
5. Ignition Off: move the continuous/off switch to left and this will cut off the
gas supply and extinguish the flame.
FLAME ADJUSTMENT
Use the gas adjustment dial to adjust the intensity of the flame.
REFILLING GAS TANK
1. Turn off the soldering iron and make sure the flame is off.
2. Wait for the soldering iron temperature to cool down naturally before refilling
gas.
3. Hold the soldering iron in an upside down position.
4. Insert and press down the butane canister nozzle into the soldering iron refilling
valve.
5. Stop refilling once gas starts to overflow. The soldering iron should never be
completely filled. OVERFILLING WILL CAUSE THE FLAME TO SPIT.
6. Please allow a few minutes for gas to stabilize before operation.

Oemtools 24356 Specifications

General

Category	Flashlight
Model	24356
Type	Handheld
Power Source	Battery
Battery Type	AA
Number of Batteries	3
Material	Plastic
Color	Black

Summary

Ignition and Extinguishing

Ignition Process

Steps for igniting the torch, including child-resistant latch operation and trigger use.

Continuous Flame Operation

How to activate and maintain a continuous flame by using the continuous/off switch.

Flame Extinguishing

Procedure to safely turn off the torch and extinguish the flame using the switch.

Flame Adjustment

Adjusting Flame Intensity

Using the gas adjustment dial to modify the flame's intensity.

Refilling Gas Tank

Gas Refilling Procedure

Step-by-step guide for refilling the butane gas tank, including safety precautions.

Refilling Precautions

Important warnings about not overfilling and allowing gas to stabilize.

General Safety Warnings

Operating Safety

Key safety measures including ventilation, protective gear, and avoiding flammable materials.

Usage and Storage

Guidelines on proper torch use, avoiding modifications, storage temperatures, and cooling.

Hazardous Material Precautions

Specific warnings about fumes from cadmium, plating, galvanized metal, and hot components.

Emergency Preparedness

Recommendations for having fire extinguishers, water, and proper cool-down periods.