Oemtools 25245 User Manual

UNPACKING
After unpacking unit, inspect carefully for any damage
that may have occurred during transit. Check for loose,
missing, or damaged parts. If any damage is observed,
a shipping damage claim must be filed with carrier.
Do not use Infrared Thermometer if broken, bent,
cracked or damaged parts (including labels) are noted.
Infrared Thermometer damaged in any way, operates
abnormally or is missing parts should be removed from
service immediately. If you suspect that the Infrared
Thermometer was subjected to a shock load (a load that
was dropped suddenly, unexpectedly, etc.) immediately
discontinue use until it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
Operating Instructions and Parts Manual 25245
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
NO CONTACT INFRARED
THERMOMETER
The following safety information is provided as a guideline to help you operate your Infrared Thermometer under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain
that anyone that uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
CAUTION
Notes
CAUTION
WARNING
WARNING
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
: Used without the safety alert symbol indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
: Provide clarity and helpful information.
10/18
2018 OEMTOOLS
™
: Cancer and Reproductive Harm. For more information, go to www.P65Warnings.ca.gov.

Oemtools 25245 Specifications

General

Brand	Oemtools
Model	25245
Category	Thermometer
Language	English

Summary

No Contact Infrared Thermometer Overview

Customer Service and Technical Support

Contact details for technical questions and customer service via phone and email.

Unpacking and Initial Inspection

Guide for inspecting the infrared thermometer for transit damage after unpacking.

Safety Signal Word Definitions

Explains the meaning of WARNING, CAUTION, and Notes symbols used in the manual.

Important Safety Rules

General Safety Precautions

Covers tool knowledge, work area, children, alcohol, apparel, and personal safety rules.

Operational and Tool Safety

Focuses on checking for damage, proper maintenance, work environment, and avoiding hazards.

Operational Guidelines and Product Purpose

Vehicle Operation Safety

Specific safety advice for working on vehicles, including ventilation and moving parts.

Product Purpose and Disposal

Explains the thermometer's function and provides guidance for its end-of-life disposal.

Product Specifications and Safety

Technical Specifications

Details temperature range, accuracy, resolution, response time, and power specifications.

Safety Warnings and Cautions

Critical safety advice for laser use, hazardous environments, and preventing unit damage.

Distance to Spot Size

Explains the relationship between distance and measured spot size, and field of view.

Operation and Maintenance

Emissivity and Measurement Accuracy

Discusses emissivity, surface compensation, and factors affecting readings.

LCD Display and Button Functions

Identifies and describes the icons on the LCD and the functions of the unit's buttons.

Operating the Unit and Locating Hot Spots

Step-by-step usage instructions for taking measurements and finding thermal anomalies.

Maintenance and Cleaning

Procedures for cleaning the lens and the unit's case for proper upkeep.

Warranty and Contact Information

Limited Lifetime Warranty

Outlines the warranty terms, conditions, and limitations for the product.

Contact OEM TOOLS

Provides OEM TOOLS contact details for customer support, address, phone, and website.