Ofna Racing HYPER10-TT User Manual

Lists necessary radio control equipment for the Nitro truck.

Lists items required for starting the Nitro engine.

Lists tools recommended for assembly and maintenance.

Lists parts and accessories included with the Nitro truck.

Details the 2.4GHz Direct Sequence Spread Spectrum technology.

Outlines the 3-channel, LED edition, and digital trim features.

Covers throttle fail-safe, battery requirements, and low battery indicator.

Identifies key parts and controls of the 2.4G transmitter.

Provides essential safety guidelines and disclaimers for transmitter use.

Explains the function of Steering Dual Rate (ST. DR) for servo travel.

Details how to adjust the dual rate using INC and DEC buttons.

Guides on verifying the set dual rate value on the vehicle.

Step-by-step guide for binding the transmitter to the receiver.

Explains the operation of the third channel switch.

Covers battery replacement, disposal, and low voltage warnings.

Provides technical data for transmitter and receiver.

Highlights auto-neutral, thermal protection, LED, and heatsink features.

Warns about lack of Low Voltage Cutoff and LiPo battery risks.

Lists input voltage, power, motor support, and other specs.

Details the procedure for setting the ESC neutral position.

Outlines the sequence for connecting and operating the ESC.

Provides contact details for OFNA tech support.

Outlines the conditions and limitations of the OFNA warranty.

Specifies OFNA's liability regarding product use and damage.

Provides essential safety guidelines for operating the hobby product.

Guides users on how to correctly fill out the technical support form.

Details requirements for submitting warranty or repair claims.

Shows an exploded diagram of the Nitro engine with part callouts.

Lists all replaceable parts for the Nitro engine with numbers and prices.

Step-by-step guide for the initial break-in of the Nitro engine.

Details adjustments for Master, Mid-Range, and Low-Speed needles.

Lists specific glow plug types recommended for the engine.

Illustrates the assembly steps for the front and rear differentials.

Provides instructions for assembling the center differential.

Details the assembly of the front and rear gearboxes.

Shows the first steps for assembling the front suspension arms.

Details the third stage of front suspension arm assembly.

Guides on attaching the front shock tower to the chassis.

Details the installation of the front body post.

Shows the initial steps for assembling the front stabilizer.

Continues the assembly of the front stabilizer.

Illustrates the installation of the front upper arms.

Details the assembly of the steering servo saver components.

Shows the first stage of assembling the steering rod system.

Guides on attaching the front upper arm holder.

Details the second stage of the steering rod assembly.

Details the installation of the front bumper.

Guides on attaching front brace and suspension to the chassis.

Shows the first steps for rear suspension arm assembly.

Continues the assembly of rear suspension arms.

Guides on attaching the rear shock tower.

Continues the assembly of the rear shock tower.

Details the installation of the rear upper arms.

Further steps for rear suspension arm assembly.

Shows the initial steps for rear stabilizer assembly.

Guides on attaching the wing stay.

Details the installation of the rear brace holder.

Continues the assembly of the wing stay.

Guides on attaching the rear brace.

Guides on mounting the rear bumper to the chassis.

Details attaching the center differential mount.

Shows the first steps for assembling the center gearbox.

Continues the assembly of the center gearbox.

Details mounting the assembled center gearbox.

Guides on installing the engine mount.

Shows the first steps for assembling the clutch.

Guides on mounting the engine to the chassis.

Details the assembly and mounting of the fuel tank.

Shows the assembly of the exhaust manifold.

Guides on attaching the muffler to the manifold.

Details the installation of the manifold spring.

Shows the connection of the fuel tube.

Details the assembly of the throttle linkage system.

Guides on installing the servo horns.

Shows the assembly of the radio tray and its components.

Guides on assembling and preparing the receiver box.

Illustrates the connection of servos, receiver, and switch.

Details mounting the radio tray and receiver box to the chassis.

Shows the assembly of the air filter components.

Guides on installing the air filter onto the engine.

Details the assembly of the steering servo rod.

Shows the first steps for front shock assembly.

Continues the assembly process for rear shocks.

Details the third stage of shock absorber assembly.

Guides on installing dust covers for shock shafts.

Shows the installation of front and rear shock springs.

Guides on completing the front shock absorber assembly.

Details the final steps for rear shock absorber assembly.

Shows how to assemble wheels and tires.

Guides on mounting tires to the front knuckles.

Details mounting tires to the rear hubs.

Shows how to assemble and attach the wing.

Guides on attaching the body shell to the chassis.

Details installing the center differential and motor plate.

Guides on assembling the motor and its gear.

Guides on attaching the upper plate to the diff mount.

Details the assembly of the battery box.

Guides on mounting the battery box to the chassis.

Details installing the servo and radio tray.

Guides on installing the antenna pipe and mount.

Details the routing and connection of electrical wires.

Details adjustments for front arms, suspension, toe angle, and shocks.

Guides on setting up rear suspension, toe angle, and shocks.

Covers steering rod setup and wing position adjustments.

Details adjustments for front suspension, toe angle, and shocks.

Guides on setting up rear suspension, toe angle, and shocks.

Covers steering rod setup and wing position adjustments.

Lists part numbers and visual references for common components.

Continues the part number reference across various components.

Lists part numbers and visual references for additional components.

Continues the part number reference across various components.

Lists parts from 10010 to 21041 with descriptions and prices.

Lists parts from 21044 to 21317 with descriptions and prices.

Lists specific parts for the electric version and optional components.