Ofna Racing LD3 User Manual

OFNA RACING
22692 GRANITE WAY, STE. B
LAGUNA HILLS, CA. 92653
Tel: (949) 586-2910
RTR INSTRUCTION MANUAL
SAFETY PRECAUTIONS
!
This radio control models is not a toy!
- First builders should seek advice from people having building experience in order
to assemble the model correctly and to produce it's performance to full extent.
- Assemble this kit only in places out of children's reach!
- Take enough safety precautions prior to operating this model. You are responsible
for this models assembly and safe operation!
- Always keep this instruction manual ready at hand for quick reference, even after
completing the assembly.
*SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Technical Data:
Length: 378mm Width: 197- 200mm Height: 110mm W/base: 265mm Ground Clearance: 5mm-10mm(Adjustable)
Caster Angle: 8 to14 Degree (Adjustable) Front Toe-In: Adjustable Rear Toe-In: Adjustable
Track (Front): 173mm Track (Rear): 173mm Tires (Front): 65mm x 26mm Tires (Rear): 65 x 26mm-30mm
Clutch Bell : 15T-19T Spur Gears: 42T- 38T Weight: 1720grms (including engine)
4WD
Shaft Drive
1:10 SCALE NITRO POWERED TOURING CAR

Ofna Racing LD3 Specifications

General

Brand	Ofna Racing
Model	LD3
Category	Motorized Toy Car
Language	English

Summary

SAFETY PRECAUTIONS

REQUIRED FOR OPERATION

BEFORE RUNNING GUIDELINES

Safe Operation Areas

Engine Starting Procedure

Engine Break-in and Maintenance

General Safety Precautions

Important safety warnings regarding hot parts, moving components, radio control, and fuel storage.

ASSEMBLY OF THE DIFFERENTIAL

ASSEMBLY OF THE FRONT GEAR BOX

ASSEMBLY OF THE REAL GEAR BOX

ASSEMBLY OF THE FRONT KNUCKLE ARMS AND CVA SHAFT

ASSEMBLY OF THE FRONT SUSPENSION ARMS

ASSEMBLY OF THE REAR WHEEL HUB

ASSEMBLY OF THE REAR SUSPENSION ARMS

ASSEMBLY OF THE SEVRO SAVER

ASSEMBLY OF THE SEVRO SAVER AND STEERING RODS

ASSEMBLY OF THE FRONT BLOCK ONTO CHASSIS

ASSEMBLY OF THE TWO SPEED AND REAR GEAR BOX ONTO CHASSIS

ASSEMBLY OF THE STEERING SERVO and THROTTLE SERVO

ASSEMBLY OF THE RADIO TRAY

ASSEMBLY OF THE RADIO TRAY ONTO CHASSIS

ASSEMBLY OF THE FRONT SHOCK TOWER AND FRONT UPPER ARM

ASSEMBLY OF THE REAR SHOCK TOWER ONTO REAR GEAR BOX

ASSEMBLY OF THE ENGINE

ASSEMBLY OF THE 2-SPEED CLUTCH BELL

ASSEMBLY OF THE ENGINE ONTO CHASSIS

ASSEMBLY OF THE BRAKE LINKAGE

ASSEMBLY OF THROTTLE HORN INTO SERVO AND BRAKE LEVER

ASSEMBLY OF THE ALUMINUM THREADED BODY SHOCKS

FILLING THE SHOCKS WITH OIL

ASSEMBLY OF THE FRONT SHOCK INTO SHOCK MOUNT

ASSEMBLY OF THE TIRES AND WHEELS

ASSEMBLY OF THE WHEELS ONTO FRONT KNUCKLE ARM AND REAR HUB

SETTING GUIDE

Front and Rear Toe-In and Toe-Out Setting

Adjusting the steering rod length for front toe angle and rear hub ball for rear toe angle.

Front and Rear Camber Angle Setting

Adjusting the front upper arms and rear turnbuckles for proper wheel camber angles.

SETTING THROTTLE LINKAGE

Throttle Linkage Adjustment Before Engine Start

SPEED TRANSMISSION ADJUSTMENT

Clutch Shift Point Adjustment

OPERATING YOUR MODEL SAFELY

ASSEMBLY OF THE LEXAN RTR SHOCKS

SHOCK FILLING AND SPRING ASSEMBLY

ASSEMBLY OF THE FRONT SHOCK INTO SHOCK TOWER

ASSEMBLY OF THE SINGLE SPEED GEAR

ASSEMBLY OF THE SINGLE SPEED CLUTCH BELL