Ofna Racing titan twin User Manual

INSTRUCTION MANUAL
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING
THIS MODEL.
KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.

Ofna Racing titan twin Specifications

General

Brand	Ofna Racing
Model	titan twin
Category	Motorized Toy Car
Language	English

Summary

Required for Operation

Things Needed

Lists necessary items to purchase for operating the model.

Included with Kit

Lists items provided in the model kit.

Must Read This Before Running

Where to Run Car?

Guidelines and restrictions on safe operating locations for the model.

Glow Fuel

Safety precautions and handling instructions for glow fuel.

First Time Starting the Engine

Steps and precautions for initially starting the engine.

Precautions

General safety warnings and operating tips for the model.

Checking Engine Throttle

Throttle and Brake Servo Alignment

Instructions for correctly aligning the throttle and brake servos.

Plastic Parts

Assembly of the Differential

Assembly of the Gear Box

Assembly of the Front Arms Holder

Assembly of the Front Knuckle Arms

Assembly of the Suspension Arms

Assembly of the Front Bilizer

Assembly of the Servo Saver and Steering Rod

Assembly of the Servo Saver Onto Lower Chassis

Assembly of the Rear Upper Arms

Assembly of the Rear Wheel Hub

Assembly of the Rear Hub and Suspension Arms Into Gear Box

Assembly of the Rear Stabilizer

Assembly of the Cap Joint Support Mount and Post

Assembly of the Front Servo and Center Diff. Mount

Assembly of the Muffler Stay

Assembly of the Steering Rod

Assembly of the Front Gear Box Onto Chassis

Assembly of the Rear Gear Box Onto Chassis

Assembly of the Front and Rear Shock Stay

Assembly of the Two Speed Transmission

Assembly of the Slipper Clutch

Assembly of the Brake Pads

Assembly of the Two Speed Gears

Assembly of the 2 Speed Transmission Into Center Mount

Assembly of the Brakecam and Center Diff. Mount Plate

Assembly of the Upper Chassis Brace

Assembly of the Lower Chassis Stiffener

Assembly of the Stiffener Into Chassis

Assembly of the Front and Rear Supporter Parts

Assembly of the Shock Absorber

Fill the Shocks with Oil

Assembly the Dust Cover and Shock Spring

Assembly of the Front and Rear Shock Into Shock Stay

Assembly of the Front and Rear Chassis Skip Plate

Assembly of the Side Plate Mount

Assembly of the Front Steering Servo Onto Chassis

Assembly of the Engine Onto Chassis

Assembly of the Side Plate

Assembly of the Chassis Stiffener

Assembly of the Tuned Pipe

Assembly of the Muffler

Assembly of the Fueltube and Pressure Tube

Assembly of the Tires and Wheels of the Right Handside

Assembly of the Tires and Wheels of the Left Handside

Assembly of the Brake Linkage

Assembly of the Engine Mount

Assembly of the 2-Speed Clutch Bell

Assembly of the Engine

Assembly of the Air Filter and Manifold

Assembly of the Exhaust System

Assembly of the Tire Onto Front Knuckle and Rear Hub

Assembly of the Body Post

Set-Up of the Front Width

Front Toe-In and Toe-Out Settings

Adjusts steering rod length for front tire toe angle.

Adjustment of the Front Camber

Adjusts upper steering ball for front wheel camber.

Adjustment of the Rear Camber

Adjusts rear wheel camber setting.

Adjusting the Shift Point

2 Speed Gear Ratio Combinations

Align Throttle Servo and Brake Same as Shown

Operating Your Model Safely

Before Running

Checks to perform before operating the radio control model.

Engine Start-up

Steps for starting the engine and preparing for operation.

While Running

Checks and actions to take during model operation.

Cautions for Safety

General safety warnings and precautions for model operation.

Important Notice