OFYR PRO Series - Ceramic Blocks Information; Intended Use of Ceramic Blocks; Ceramic Block Maintenance

13OFYR
®
MANUAL - OFYR
®
COOKING UNITS PRO
EN
10. CERAMIC BLOCKS
Ceramics are industrially manufactured, baked products. A print is added to the top layer of clay, the main
component, which then is baked on an extremely high temperature. Distinctive element of ceramics are its
very practical characteristics: it is hygienic and resistant to stains, scratches and heat.
10.1 INTENDED USE
• Ceramics are weather proof and can be stored outdoors on a permanent basis.
• Ceramics are a very compact and tough mass, making it relatively vulnerable for
impact damaging. Therefore, be careful with for example heavy objects,
because the impact of these falling on a worktop might cause irreparable damage.
• We recommend using a cutting board to prevent your knives from getting blunt.
• Avoid contact with acetone and with extremely aggressive cleaning agents
such as metal cleaners, drain cleaners and other products with a
pH-value <2 or >12.
• Never stand on the ceramic block.
10.2 MAINTENANCE TIPS
 •  Beforetherstuse:removepossibleglueresidueswithaplasticscraper
and clean the worktop thoroughly with a mild detergent.
• Use a damp cloth with a mild detergent for daily cleaning.
Make sure to clean the block after use.
• Clean the block more intensive a few times a year.
• Cleaning of persistent stains: use a mild detergent with a damp cloth
or sponge (no scourer).
• Do not clean the blocks in the dishwasher.
BLOCK FOR OFYR ISLAND 100 PRO
CERAMIC DARK GREY