Ogden RCR812 User Manual

Owner’s Manual
Read, Understand, and Follow the information and procedures in this
manual to safely operate and maintain the Hay Runner wheel rake.
For Hay Rakes after serial #01425

Ogden RCR812 Specifications

General

Brand	Ogden
Model	RCR812
Category	Farm Equipment
Language	English

Summary

Introduction

Welcome

Introduction to the wheel rake and manual.

Description and Intended Use

Details the rake's design and purpose.

Safe Operation

Guidelines for safe use of the equipment.

Specifications

Intended Usage

Defines the specific applications for the rake.

Operator Orientation

Explains directional references used in the manual.

Product Improvements

Information on ongoing design enhancements.

Manual Management

Serial Number Location

Where to find the unit's serial number.

Owner/Operator Manual Storage

Recommended location for storing the manual.

Unanswered Questions

Contact information for further assistance.

Safety

General Safety Information

Overview of safety principles and precautions.

Safety Alert Symbol

Explanation of the safety alert symbol and its meaning.

Safety Icons Nomenclature

Identification of various safety symbols used.

Prohibited Actions

List of actions that should not be performed with the rake.

Hazard Avoidance

Guidance on preventing common hazards.

General Safety Instruction

Overall safety instructions for rake operation and maintenance.

Operation Safety

Specific safety guidelines for operating the wheel rake.

Transporting Safety

Safety precautions for transporting the rake.

Storage Safety

Safety measures for storing the wheel rake.

Maintenance Safety

Safety guidelines for performing maintenance.

Training

Requirements and recommendations for user training.

OSHA Training Requirements

Overview of relevant OSHA safety training standards.

Federal Laws and Regulations

OSHA Regulations

Details of OSHA safety compliance requirements.

Employee Tractor Operating Instructions

Safety directives for tractor operation with the rake.

Safety Signs and Labels

General Information

General information about safety decals on the equipment.

Decals

Details on the purpose and importance of safety decals.

How to Install Replacement Safety Signs

Procedure for applying new safety labels.

Safety Sign Locations

Decal List

Identification of safety signs and their quantities.

Wheel Rake Safety Signs

Warning Decals

Visual examples of safety decals and their meanings.

Assembly

Assembly Area

Requirements for a suitable assembly location.

Quick Reference Guide

A summary of key assembly steps.

Tongue Extension

Information on the rake's tongue extension feature.

Attach the Tongue Assembly

Rake Arm Transport Locks

Attach Optional Single or Double Wheel Extension

Steps for adding wheel extensions.

Rake Wheel Installation and Adjustment

Hay Rake Wheels

Correct installation and orientation of rake wheels.

Adjust Height of Hitch

Procedure for setting the correct hitch height.

Grease the Pivot Pins

Lubrication points for pivot pins during assembly.

Optional Center Wheel Kit

Initial Set Up

Setting Up the Wheel Rake

General steps for initial setup.

Attaching to Tractor

Steps for securely connecting the rake to a tractor.

Purge Air from Hydraulic Lines and Cylinders

Bleeding air from the hydraulic system.

Rake Leveling and Adjustment

Level the Rake

Adjusting the rake for optimal operation.

Wing Extension Adjustment

Adjusting the rake's working width.

Rake Angle Adjustment

Rake Angle Adjustment (rear center)

Setting the angle for rear rake wheels.

Rake Angle Adjustment (front center)

Setting the angle for front rake wheels.

Adjust Rake Wheel Ground Pressure

Wheel Rake Operation

User Safety

Safety considerations for the operator.

Hydraulic Requirements

Specifications for the tractor's hydraulic system.

Rake Usage and Lifting

Using the Wheel Rake

Steps for effective rake operation.

Raising Front Wheel Rakes

Procedure for lifting the front rake wheels.

Center Rake and Single Side Operation

Raising Center Wheel Rakes

Procedure for lifting the center rake wheels.

Single Sided Rake Operation

Operating the rake with only one side engaged.

Detaching From Tractor

Transporting

Transporting Safety (Road)

Safety rules for road transport.

Transporting Procedure

Step-by-step guide for transporting the rake.

Storage

Placing In Storage

Steps for putting the rake into storage.

Removing From Storage

Steps for preparing the rake after storage.

Maintenance

General Maintenance Safety

Safety precautions during maintenance tasks.

Work Area

Requirements for a safe maintenance workspace.

Parts Replacement

Guidelines for replacing worn or damaged components.

Hydraulic and Component Maintenance

Hydraulic System Safety

Safety measures when working with the hydraulic system.

Welding Repairs

Procedures and precautions for welding on the rake.

Wheel Bearings

Maintenance and servicing of wheel bearings.

Tine and Lubrication Maintenance

Replacing Tines

Step-by-step guide for replacing damaged tines.

Lubrication

Recommended lubrication points and schedule.

Inspection and Torque Requirements

Inspection

Regular checks and examinations of the rake's condition.

Bolt Torque Requirements

Specifications for proper bolt tightening.

Replacing Rake Wheel Tension Spring

Troubleshooting

Replacement Parts

Ordering Parts

How to order necessary parts from the manufacturer.

Wheel Rake Frame

Hinged and Standard I-Series Assembly

Rake Wheel Assembly

Single and Tandem Axles

Hydraulic System

Center Wheel Assembly

Warranty