To Next Page
T
Thomas DawsonAug 27, 2025
How to fix unreadable output on OHAUS SF40A Printer?
- GGregory AndersonAug 27, 2025
To fix unreadable output, change the ribbon cartridge or re-tension the ribbon properly.
How to fix unreadable output on OHAUS SF40A Printer?
To fix unreadable output, change the ribbon cartridge or re-tension the ribbon properly.
What does 'Under Load' mean on OHAUS Printer?
If the printer displays 'Under Load', it indicates the balance is in underload range. Check the balance.
How to fix transmission error on OHAUS Printer?
To resolve a transmission error, check the interface parameter settings on both the printer and the instrument.
What to do if pilot lamp flashes on OHAUS SF40A Printer?
If the pilot lamp flashes, ensure that the printer and the instrument are connected. You can also try switching the printer off and on. Alternatively, change the settings of the printer or the connected instrument.
How to fix 'Transmission Error' on OHAUS Printer?
General| Printer Type | Impact Dot Matrix |
|---|---|
| Operating Temperature | 5°C to 40°C |
| Application | Weighing |
| Number of Copies | 1 |
| Paper Type | Thermal |
| Interface | RS232 |
| Operating Humidity | 20% to 85% RH (non-condensing) |
| Net Weight | 0.6 kg |
| Type | Impact Printer |
| Printing Method | Dot Matrix |
| Connectivity | RS-232 |
| Weight | 12.1 lbs |