What does 'Not Executable' mean on my OHAUS Printer and how to resolve it?
If your OHAUS Printer displays 'Not Executable', it means the instrument cannot execute the printer instruction. In this case, check the balance.
What does 'Over Load' mean on OHAUS Printer?
If the printer shows 'Over Load', it means the balance is in overload range. Check the sample weight.
How to fix transmission error on OHAUS Printer?
To resolve a transmission error, check the interface parameter settings on both the printer and the instrument.
What does 'Under Load' mean on OHAUS Printer?
If the printer displays 'Under Load', it indicates the balance is in underload range. Check the balance.
What does 'Date/Time Not Set Memory Error' mean on the OHAUS Printer?
If your OHAUS Printer shows 'Date/Time Not Set Memory Error', it indicates printer error messages. Begin by checking the instrument. You can also try resetting the printer and setting the date/time. If the issue persists, the back-up battery may be depleted, and you should contact OHAUS service.
What does 'Out of range' mean on my OHAUS Printer?
If your OHAUS Printer displays 'Out of range', it signifies that the sample weight is out of range. The sample weight must be in the range of 70% - 130% of the current average value.
What does 'Not Executable' mean on OHAUS SF40A Printer?
A 'Not Executable -------- ------' message on your OHAUS Printer indicates that the instrument cannot execute the printer instruction. Check the balance.
Why is the OHAUS Printer printout unreadable?
An unreadable printout from your OHAUS Printer may be due to a worn or entangled ribbon. Try changing the ribbon cartridge or properly tensing the ribbon. If that doesn't work, the service life of the printing unit may be at its end, in which case please contact OHAUS service.
What does 'Timeout' error mean on OHAUS Printer?
If your OHAUS Printer displays a 'Timeout -------------- ---------------' message, it means data transfer hasn't completed in 45 seconds. Move the balance to a more stable location and check the balance.
How to resolve 'Date/Time Not Set Memory Error' on OHAUS SF40A Printer?
If you encounter a 'Date/Time Not Set ---- --- Memory Error --------- ---------' message on your OHAUS Printer, check the instrument, reset the printer, and set the date/time. If the issue persists, the back-up battery may be depleted, and you should contact OHAUS service.
Describes physical layout and connection ports of the printer.
Details the user interface buttons and their associated operations.
Provides a general overview of the SF40A printer's purpose and capabilities.
Lists the key functionalities and advantages of the SF40A printer.
Outlines essential safety precautions for using the printer.
Explains how to connect the printer to a power source.
Guides users through installing and configuring the printer via software.
Describes how to configure the printer using its onboard controls.
Details the physical connection to the instrument and the process of turning on the printer.
Covers the steps for loading the paper roll into the printer.
Explains basic operations performed with brief button presses.
Describes navigating menus and initiating applications with button combinations.
Details the printer's menu hierarchy and available configuration settings.
Explains how to use the statistics and totaling functions of the printer.
Describes how to initiate and end the printer's self-test sequence.
Details procedures for replacing the paper roll and ink ribbon.
Provides instructions for cleaning the printer and its proper environmental disposal.
Addresses common printer problems such as printout errors, connection issues, and data transfer problems.
Provides recommended configuration parameters for connecting the printer to various Ohaus instruments.
Lists available consumables and spare parts with their respective part numbers.
Describes the RS232C connector and relevant transmission parameters.
Presents detailed technical specifications and compatibility limitations of the printer.
General| Printer Type | Impact Dot Matrix |
|---|---|
| Operating Temperature | 5°C to 40°C |
| Application | Weighing |
| Number of Copies | 1 |
| Paper Type | Thermal |
| Interface | RS232 |
| Operating Humidity | 20% to 85% RH (non-condensing) |
| Net Weight | 0.6 kg |
| Type | Impact Printer |
| Printing Method | Dot Matrix |
| Connectivity | RS-232 |
| Weight | 12.1 lbs |
To Next Page
