What does 'Under Load' mean on my OHAUS Printer?
If the OHAUS Printer displays 'Under Load', it indicates the balance is in underload range. Check the balance. Also, ensure the weighing pan is correctly positioned.
What does 'Over Load' mean on OHAUS Printer?
If the printer shows 'Over Load', it means the balance is in overload range. Check the sample weight.
How to fix transmission error on OHAUS Printer?
To resolve a transmission error, check the interface parameter settings on both the printer and the instrument.
What does 'Under Load' mean on OHAUS Printer?
If the printer displays 'Under Load', it indicates the balance is in underload range. Check the balance.
How to fix unreadable output on OHAUS SF40A Printer?
To fix unreadable output, change the ribbon cartridge or re-tension the ribbon properly.
What to do if the OHAUS Printer pilot lamp does not light?
If the pilot lamp on your OHAUS Printer isn't lighting up, first ensure the printer is switched on. If it still doesn't light, there may be a power supply fault, and you should contact OHAUS service.
What does 'Not Executable' mean on OHAUS SF40A Printer?
A 'Not Executable -------- ------' message on your OHAUS Printer indicates that the instrument cannot execute the printer instruction. Check the balance.
Why is the OHAUS Printer printout unreadable?
An unreadable printout from your OHAUS Printer may be due to a worn or entangled ribbon. Try changing the ribbon cartridge or properly tensing the ribbon. If that doesn't work, the service life of the printing unit may be at its end, in which case please contact OHAUS service.
What does 'Timeout' error mean on OHAUS Printer?
If your OHAUS Printer displays a 'Timeout -------------- ---------------' message, it means data transfer hasn't completed in 45 seconds. Move the balance to a more stable location and check the balance.
How to resolve 'Date/Time Not Set Memory Error' on OHAUS SF40A Printer?
If you encounter a 'Date/Time Not Set ---- --- Memory Error --------- ---------' message on your OHAUS Printer, check the instrument, reset the printer, and set the date/time. If the issue persists, the back-up battery may be depleted, and you should contact OHAUS service.
General| Printer Type | Impact Dot Matrix |
|---|---|
| Operating Temperature | 5°C to 40°C |
| Application | Weighing |
| Number of Copies | 1 |
| Paper Type | Thermal |
| Interface | RS232 |
| Operating Humidity | 20% to 85% RH (non-condensing) |
| Net Weight | 0.6 kg |
| Type | Impact Printer |
| Printing Method | Dot Matrix |
| Connectivity | RS-232 |
| Weight | 12.1 lbs |
To Next Page
