To Next PageTo Next Page
Need help?Do you have a question about the Ohio Medical PTS-ISU and is the answer not in the manual?
General| Brand | Ohio Medical |
|---|---|
| Model | PTS-ISU |
| Category | Medical Equipment |
| Language | English |
General statements about product use, operation, and maintenance.
Emphasizes reading and understanding all safety and operating instructions.
Defines the product's purpose in medical facilities.
Defines warning terms and lists abbreviations used in the manual.
Lists critical safety warnings regarding transport, repair, contamination, and flammables.
Lists cautions on lubricants, sterilization, cleaning solutions, knob operation, and transport use.
Defines the service, maintenance, and parts information covered.
Describes the Push-To-Set™™ feature and operational mechanism.
Details performance, gauge accuracy, physical, and environmental specs.
Details cleaning procedures and approved solutions.
Explains acceptable sterilization methods and precautions.
Lists causes and solutions for the unit failing to provide vacuum.
Lists causes and solutions for gauge issues and suction level adjustment problems.
Lists causes and solutions for cycling problems and unit noises.
Lists causes and solutions for relief valve activation and slow gauge response.
Lists essential tools and equipment required for servicing the unit.
Provides step-by-step instructions for disassembling the PTS-ISU unit.
Provides step-by-step instructions for assembling the PTS-ISU unit.
Details the process for disassembling the regulator module.
Provides instructions on removing and inserting batteries from the digital gauge.
Details the procedure for adjusting the vacuum relief valve.
Outlines the setup requirements for performing service checkout procedures.
Details the procedure for testing the Push-To-Set™ functionality.
Explains how to test the accuracy of the vacuum gauge.
Details procedures for performing leak tests on supply and patient sides.
Details the procedure for testing flow rates in continuous mode.
Details testing flow rates in intermittent mode.
Provides instructions for adjusting the timing cycles of the intermittent suction unit.
Details the procedure for testing the regulation of the vacuum level.
Details vacuum build-up and bleed-down tests for both modes.
Recommends periodic inspections and tests for maintaining the vacuum regulator.
Outlines repair policies and provides technical support contacts.
Details the procedures for cleaning, packaging, and returning the vacuum regulator.
Details the procedure for installing fittings onto the regulator.
Lists all available parts with their corresponding part numbers and descriptions.
Lists accessories like filters, tubing, and safety traps.
Provides declarations regarding electromagnetic emissions from the PTS Digital.
Provides declarations regarding electromagnetic immunity for the PTS Digital.
Details immunity testing results for proximity fields from RF communication equipment.
