Ohlins prodrive SUR 3A00 User Manual

Mounting instructions
SUR 3A00, 4A00, 3A01, 4A01, 3A02, 4A02
SUBARU Impreza WRX, Rear
Shock absorber models
Left Rear Gravel SUR 3A00
Right Rear Gravel SUR 4A00
Left Rear Tarmac, rough SUR 3A01
Right Rear Tarmac, rough SUR 4A01
Left Front, Tarmac, smooth SUR 3A02
Right Front, Tarmac, smooth SUR 4A02
Adjusters
Your Öhlins shock absorber type
46 HRC features the following
adjusters:
Compression damping
Adjuster knob at the top of the
reservoir.
Rebound damping
Adjuster screw (3 mm allen key)
at the bottom of the damper body
Spring preload
Adjustment rings under the
spring. Adjustments are made
with C-spanners.
When delivered the shock
absorber is dialled in to Öhlins
recommended settings. If you
have “played” with the adjusters,
please check the settings.
The adjusters have a normal
right-hand thread. Click position
zero (0) is when the adjusters are
turned clockwise to fully closed.
The first click you feel, when you
turn it counter clockwise (to
open) is (1) and so on.
CAUTION!
Using too much force when
closing the adjuster will destroy
vital sealing surfaces. Use no tools
to the adjusters, simply your fin-
gers and a 3 mm allen key to the
rebound.
Compression
adjuster
Rebound adjuster
Spring
preload
adjuster
by
SUR 3A00, 4A00, 3A01, 4A01, 3A02, 4A02, Issued 02 04 04
by
Prodrive Limited, Banbury
Oxfortshire OX16 3ER
England
Phone +44 (0) 1295-25 44 00, fax +44 (0) 1295-26 93 30
www.prodrive.com

Ohlins prodrive SUR 3A00 Specifications

General

Brand	Ohlins
Model	prodrive SUR 3A00
Category	Motorcycle Accessories
Language	English

Summary

Mounting Instructions Overview

Shock Absorber Models

Lists Öhlins shock absorber models for Subaru Impreza WRX, rear.

Öhlins Shock Absorber Adjusters

Details the compression, rebound, and spring preload adjusters on the Öhlins shock absorber, including a caution.

Safety and Preparation

Safety Signs and Warnings

Explains safety alert symbols and consequences of ignoring warnings.

Kit Contents

Lists all parts included in the shock absorber mounting kit.

Before Installation Procedures

Provides manufacturer responsibility statements and crucial installation warnings.

Camber Bushing and Installation Steps

Camber Bushing Functionality

Explains Öhlins struts feature camber bushings for wheel camber adjustment.

Installation Steps

Provides numbered steps for installing the Öhlins shock absorber.

Vehicle Setup and Final Checks

Setting Up Your Car: Gravel

Recommended setup for Gravel use, including camber, ride height, and damping clicks.

Setting Up Your Car: Tarmac (rough)

Recommended setup for rough Tarmac, including camber, ride height, and damping clicks.

Setting Up Your Car: Tarmac (smooth)

Recommended setup for smooth Tarmac, including camber, ride height, and damping clicks.

Final Cautions and Warnings

Provides critical CAUTION and WARNING notices regarding ride height and installation.