7
4. Product
This manual is for CT-8, CT-10, CT-12 and CT-15 full range 2-way passive loudspeakers. (If you
require a manual for any other Ohm product please visit the Ohm website).
CT-8, CT-10, CT-12 and CT-15 are designed mainly for installation use.
The loudspeakers include multiple mounting points and a wide range of installation accessories
are available.
Cabinets are available in black or white paint finish or in any desired colour on request.
CT-8
• TH-1 cast aluminium top hat
• CPFK recessed flying points
• CFEK set of three flying eyes
• ABS-1 adjustable stand bracket
• ABT-1 adjustable threaded
spigot bracket
• LWB large wall bracket
• SS-1 speaker stand
• TP-1 adjustable threaded pole
• 1 x 8” low frequency driver
• 1 x 1” horn loaded compression driver
• CT-8 steel grill assembly
• CT-8 backplate and crossover
CT-10
• TH-1 cast aluminium top hat
• CPFK recessed flying points
• CFEK set of three flying eyes
• ABS-1 adjustable stand bracket
• ABT-1 adjustable threaded
spigot bracket
• LWB large wall bracket
• SS-1 speaker stand
• TP-1 adjustable threaded pole
• 1 x 10” low frequency driver
• 1 x 1” horn loaded compression driver
• CT-10 steel grill assembly
• CT-10 backplate and crossover
CT-12
• TH-1 cast aluminium top hat
• CPFK recessed flying points
• CFEK set of three flying eyes
• ABS-1 adjustable stand bracket
• ABT-1 adjustable threaded
spigot bracket,
• LWB large wall bracket
• SS-1 speaker stand
• TP-1 adjustable threaded pole
• 1 x 12” low frequency driver
• 1 x 1.5” horn loaded compression driver
• CT-12 steel grill assembly
• CT-12 backplate and crossover
CT-15
• TH-1 cast aluminium top hat
• CPFK recessed flying points
• CFEK set of three flying eyes
• ABS-1 adjustable stand bracket
• ABT-1 adjustable threaded
spigot bracket
• LWB large wall bracket
• SS-1 speaker stand
• TP-1 adjustable threaded pole
• 1 x 15” low frequency driver
• 1 x 1.5” horn loaded compression driver
• CT-15 steel grill assembly
• CT-15 backplate and crossover
5.1 Accessories and spare parts
To Next Page
Loading...