Need help?Do you have a question about the Ohmeda Giraffe OmniBed and is the answer not in the manual?
Explains how the OmniBed functions as both an incubator and a radiant warmer.
Details the different operational modes (Air, Baby, Manual) for temperature control.
Identifies and describes the physical controls and screen elements of the device.
Explains how to select and adjust temperature settings for various modes.
Covers the specific procedures and settings for using the OmniBed as an incubator.
Details settings and display for incubator operation using air temperature control.
Details settings and display for incubator operation using baby's skin temperature.
Explains how to increase fan speed for improved thermal performance during open door access.
Covers the specific procedures and settings for using the OmniBed as a warmer.
Details settings for warmer operation using manual radiant heater power control.
Details settings for warmer operation using baby's skin temperature control.
Explains how to use dual probes for co-bedding or monitoring multiple sites.
Describes how the OmniBed automatically switches modes when the canopy position changes.
Introduces the various optional features and how to access them via the menu.
Details the function and operation of the unit's built-in timer.
Explains how to view historical temperature and mode data graphically.
Describes the reference screen for calculating suggested infant temperature ranges.
Covers settings for temperature units, alarms, and other device configurations.
Explains the operation and features of the integrated in-bed scale.
Details how to set and monitor humidity levels within the infant compartment.
Provides information on how alarms are indicated and managed on the unit.
Describes the conditions and actions for the high air temperature alarm.
Describes the conditions and actions for the low air temperature alarm.
Explains the alarm for a baby's temperature being too high.
Explains the alarm for a baby's temperature being too low.
Groups alarms related to excessive air temperatures in the compartment.
Details the alarm for air temperature exceeding 38°C.
Details the alarm for air temperature exceeding 40°C.
Explains the alarm triggered when the baby probe is unplugged.
Describes the alarm indicating a fan malfunction or lack of airflow.
Explains the alarm for the fan operating at high speed due to sensor malfunction.
Details the alarm for the disconnection of the air temperature probe.
Explains the alarm for a malfunctioning air temperature probe.
Describes the alarm when the canopy movement is interrupted, shutting off heat.
Explains the alarm related to the radiant heater running at high power for an extended period.
Details the critical alarm indicating a system malfunction or electrical failure.
Explains the alarm for a failure in the control panel's membrane switches.
Describes the alarm and indicator for loss of electrical power.
Groups alarms that indicate a need for repair but may allow continued use in a different mode.
Lists and describes alarms related to optional features like the humidifier and scale.
Details alarms associated with the humidifier's operation and water level.
Explains alarms related to the scale's maximum weight limit and system failures.
Presents a comprehensive table detailing all alarms, activation criteria, and audio signals.
Illustrates and identifies the physical connections and mechanical controls on the unit.
Instructions for preparing the OmniBed for use after shipping, including canopy lock release.
Steps to inspect the physical components of the OmniBed for proper condition and function.
Procedures to verify the operation of the control panel, displays, and basic functions.
Guidelines for verifying the secure mounting and proper operation of accessories.
Essential steps and safety precautions for initial patient setup and operation.
Detailed steps for using the OmniBed in incubator mode, including preheating and probe attachment.
Detailed steps for using the OmniBed in warmer mode, including preheating and power settings.
Instructions on correctly applying the skin temperature probe for accurate readings.
Covers various procedures for accessing the patient and adjusting the bed.
Steps for opening portholes, side doors, and mattress tray for patient access.
Instructions on how to raise and lower the unit's canopy for patient access.
How to adjust the bed height using the foot pedals for caregiver convenience.
Explains how to tilt the bed for specific patient positioning needs.
Instructions for using the integrated tray for X-ray procedures.
Safety precautions and procedures for administering oxygen within the compartment.
Guidance on installing the porthole wristlets for patient restraint.
Steps for filling, operating, and removing the humidifier reservoir.
Information on connecting the OmniBed to external monitoring systems.
Details on connecting and using the RS-232 data output for monitoring.
How to connect the OmniBed to a remote nurse call system.
Steps to verify the proper function of the Nurse Call integration.
Instructions for installing and using the integrated weighing scale.
Steps for correctly fitting the scale platform and connecting the cable.
Guidance on how to accurately weigh a patient using the in-bed scale.
Procedures for attaching various accessories to the OmniBed's rail system.
Instructions for mounting the gas cylinder holder onto the unit.
Guidance on mounting the arm for organizing patient tubing.
Instructions for using the cover to close an oscillator port.
Outlines the procedures and conditions for warranty repair and service.
Provides a schedule for regular operator and service maintenance tasks.
Lists routine cleaning and filter replacement tasks for users.
Lists periodic tasks like electrical safety checks and calibration for trained personnel.
Step-by-step instructions for disassembling the unit for thorough cleaning.
Detailed procedures for cleaning and disinfecting specific parts like the humidifier and probes.
Instructions for cleaning and disinfecting the humidifier reservoir.
Guidance on cleaning and disinfecting reusable temperature probes.
Instructions for cleaning the remaining components of the OmniBed.
Details technical specifications including power, standards, environment, and user settings.
Specifies the recommended temperature and humidity ranges for operation.
Specifies the recommended temperature, humidity, and pressure for storage.
Lists the adjustable parameters for patient temperature, air control, and humidity.
Summarizes the types of alarms and their activation criteria.
Presents performance data and metrics for the OmniBed's various systems.
Details performance metrics for control accuracy, variability, warm-up time, and air velocity.
Provides performance data for the servo-humidity control and manual humidity settings.
Lists performance specifications for the integrated weight scale, including range and accuracy.
Provides physical dimensions and weight of the OmniBed in different configurations.
Lists maximum load capacities for various accessory mounting points.
General| Brand | Ohmeda |
|---|---|
| Model | Giraffe OmniBed |
| Category | Medical Equipment |
| Language | English |
To Next Page
