EN
FND 1000
GENERAL WARNINGS
46
☞
The installation must be carried out following the manufacturer
instructions. A wrong installation could cause damages to people,
animals or things, for which the manufacturer cannot be considered
liable.
• For safety, the appliance has a short power cord in order to avoid pulling it,
stumbling on it or twisting it.
• To avoid dangerous overheatings, to straighten the whole power cord and to
use the appliance as described in the “USE” paragraph is recommended.
• Do not leave the appliance unnecessarily inserted. Disconnect the plug from
the mains power supply when the appliance is not used.
• Do not obstruct ventilation or heat elimination openings.
• If the power cord of this appliance is damaged, it must be changed exclusively
by a technical assistance centre authorized by the manufacturer, since special
tools are necessary.
The electrical safety of this appliance is guaranteed only when it is
correctly connected to an eective grounding system as specied
by the current norms on electrical safety.
• It’s necessary to check this fundamental safety condition and, in case of doubts,
ask for an accurate check of the system by professionally qualied personnel.
The manufacturer cannot be considered liable for possible damages caused
by the lack of grounding of the system.
• Don’t connect the appliance to the power supply through external timers or
remote control systems.
To Next Page
Loading...
