OHSEN 1610 User Manual

OHSEN (Model 1610) DIGITAL WATCH INSTRUCTIONS
Four buttons on this watch are labelled: LIGHT, MODE, RESET, and START
TO SELECT THE DISPLAY MODE
Push the Mode Button in order to select one of the following four display modes in the following
order: Normal Time -> Stop Watch -> Alarm Reset, -> Time Reset Mode
In the Normal Time Mode, the Day of Week, the Hour, Minute and Second are displayed (none
flash). If the Alarm and Hourly Chime icons are not displayed, the Alarm and Hourly Chime are
turned off.
TO DISPLAY DAY OF WEEK, HOUR, MINUTE, SECOND AND WHETHER THE ALARM AND HOURLY
CHIMES ARE ON:
Push the Mode button until no icon is flashing. The Alarm and Hourly Chimes are off if no Alarm or
Chime icon is displayed beside the Second display.
TO DISPLAY THE DAY, MONTH AND DAY OF WEEK AND WHETHER THE ALARM AND HOURLY
CHIMES ARE ON:
In Normal Time Mode, push the Start button. The Alarm and Hourly Chimes are off if no Alarm or
Chime icon is displayed.
TO DISPLAY THE ALARM TIME
In Normal Time Mode, push the Reset button. The P or A beside the Alarm Time indicates PM or AM
time. The P or A below the Alarm Time indicates a 12 hour clock; an H indicates a 24 hour clock.

OHSEN 1610 Specifications

General

Brand	OHSEN
Model	1610
Category	Watch
Language	English

Summary

Display Mode Selection

Normal Time Mode Display

Shows Day of Week, Hour, Minute, Second. Alarm/Chime icons indicate status.

Display Day, Month, and Day of Week

Push Mode button for day/time. Push Start button for day/month/day of week.

Display Alarm Time and Format

Push Reset button to view alarm time. P/A indicates AM/PM, H indicates 24-hour.

Alarm and Chime Control

Start/Stop Alarm and Hourly Chimes

Hold Start & push Reset to toggle Alarm/Chimes. Hold Reset to test alarm.

Stop Hourly Chime Function

Hold Reset, push Mode until Day of Week display is unhighlighted to stop.

Setting Watch Time

Advance Time Settings

Hold Start button to advance the current number displayed.

Set Month, Day, and Week

Enter Time Reset Mode, use Reset to select field, Start to adjust.

Set Hour, Minute, and Second

Select Time Reset Mode, use Reset to select hour/minute/second, Start to adjust.

Set 12/24 Hour Format

In Time Reset Mode, push Reset until H (24hr) or A/P (12hr) is displayed.

Alarm Time Setup

Set Alarm Hour and Minute

Enter Alarm Reset Mode. Use Start to set Hour/Minute, then push Reset.

Confirm Alarm and Chime Icons

Push Mode after setting Alarm Time. Icons appear beside second numbers.

Stopwatch Operation

Start, Pause, and Continue Stopwatch

Use Start/Stop button to begin lap time. Push again to pause/continue.

Reset Stopwatch

Stop the stopwatch by pushing Start/Stop, then push Reset to zero.