25
Adaptive function
This function enables the thermostat to calculate when it needs to switch ON so that the required temperature is reached at the set time.
With a start time of 07:00 therefore, the thermostat may switch ON as early as 06:00 so that the desired temperature of 2 5˚C is achieved
by 07:00. Without this function set, the thermostat will start to heat at the time you set.
Press the DOWN (▽) button to switch between on and off.
Press OK (
) button to confirm.
ESC - Escape
Press OK (
) button to end programming and to return to scheduled
programme.
Type WLCT2 (and WLCT2/R/HW/2)
To Next Page
Loading...
Need help?
General
