OK. OCR 310 - Alarm and Sleep Functions; Setting Alarm 1 and Alarm 2; Alarm Snooze and Cancellation

34
EN
Alarm setting
The alarm can be set only if the FM radio is in o mode
(Standby):
3
ALARM 1
1. Press the ALARM 1/VOL- button and the alarm time will
be ashing on the display.
Note: If no settings done within 5 seconds the display
will turn o into standby.
2. Set the hours with HOUR button and minutes with MIN
button.
3. Conrm the time with ALARM 1/VOL-.
4. Press the ALARM 1/VOL- button to activate or
deactivate the alarm.
Below alarm functions are available:
Press ALARM 1/VOL- On display
1 x Alarm time 1 + BUZZER
2 x Alarm 1 + RADIO
3 x Alarm function de-activated
ALARM 2
1. Press the ALARM 2/VOL+ button and the alarm time 2
will be ashing on the display.
2. For setup, switching on/o of ALARM 2 follow the instruc-
tions as given for setup of ALARM 1. But instead of push-
ing ALARM 1/VOL- button push ALARM 2/VOL+ button.
Stop alarm
1. Snooze function: Press SNOOZE button to suspend alarm
sound for a few minutes. The alarm will start again after
approx. 5 minutes. The set alarm mode will remain ashing on
the display.
2. Press ON/OFF to stop/cancel alarm.
IM_OCR 310 W_161123_V04_HR.indb 34 23/11/16 5:02 PM