Okay RT 600 DA - General Safety Instructions; Technical Details

GB | Operating Instructions
2. General safety instructions
Noise emission information in accordance with
the German Product Safety Act (ProdSG) and
the EC Machine Directive: the noise pressure
level at the place of work can exceed 80 dB(A).
In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the
local regulations when operating your device.
Attention: Using electric power tools, you
must observe following fundamental safe
-
ty instructions to protect yourself against
electric shock, against danger of injuries
and danger of re. Read all these instruc
-
tions before using the grass trimmer and
observe them. Keep these safety instruc
-
tions at a safe place.
The machine has been constructed according to
the latest technology and in accordance with the
recognised technical safety regulations. Never
-
theless, use of the machine can involve risks to
the user or third persons, and can cause dam
-
age to the machine or other objects.
Use the machine in a safety conscious man
-
ner for suitable applications and in technically
perfect condition only and according to the
operating instructions! Immediately rectify or
have any faults rectied which could adversely
a󰀨ect safety!
Read the instruction manual carefully. It is impor
-
tant that you fully understand and observe the
safety precautions and warnings before starting
and using your trimmer for the rst time. Care
-
less or improper use of any trimmer may cause
serious or fatal injury. Observe all applicable
safety regulations, standards and ordinances.
Please familiarise yourself with the machine
before the rst use.
Grass Trimmer
GB-2
1. Technical Details
Model RT 600 DA
Rated Voltage V~ 220-240
Nominal Frequency Hz 50
Nominal Consumption W 600
Idle speed n
0
rpm 9.300
Cutting Width mm 320
Line Diameter mm 1,4
Line Length m 2 x 4
Line Feed Tap’n go
Weight kg 2,5
Sound Pressure Level (EN 50636-2-91:2014) dB (A) 93 K=3 dB (A)
Vibration m/s² 8,2 K=3,3 m/s²
Interference suppressed in accordance with EN 55014 and EN 61000.
The machine comply with the safety class II/VDE 0700
We reserve the right to make changes to the technical specications.
The devices are manufactured in accordance with the provisions of EN 60335-1 and EN 50636-2-91 and fully comply
with the provisions of the Product Safety Act.