Oki C9600 Series - Remove Waste Toner Receptacle Screws; Remove Screws Near HVPS Cover; Remove Motor Assembly Screws and Connector

27
22.3. Remove four
screws holding the
waste toner
receptacles to the
basket assembly.
22.4. Remove two
screws next to the
HVPS Cover.
22.5. Remove seven
screws. The
connector for the
motor unplugs
from underneath,
not from the
orange connector.
NOTE: The motor can be
removed individually by
removing the two screws that
are diagonally opposite and
unplugging from underneath.