Do you have a question about the Okuma MIV30-3 PU and is the answer not in the manual?
Type | Controller |
---|---|
Model | MIV30-3 PU |
Manufacturer | Okuma |
Communication Interface | Ethernet, USB |
Control System | OSP-P300 |
Axis Control | 3-axis |
Spindle Control | Analog voltage command |
Memory Capacity | 1GB |
Display | 10.4-inch LCD |
Power Supply | 24V DC |
Provides MIV unit selection guides for BL and VAC motors based on type and capacity.
Describes the system configuration of DC power supply units.
Lists important precautions for changing DC power supply units.
Lists error codes and corrective actions for power supply units.
Details step-by-step procedures for replacing external cooling fans.