OLDE MIDWAY 8 -SS - Initial Setup Instructions; Controls; Accessories

1. Set popcorn popper on a level, dry surface. Remove all packing
material and wipe inside of kettle and popper with a dry cloth. (Fig. 1) DO
NOT use harsh cleaners or abrasive chemicals. After the initial setup,
maintain a regular care and maintenance plan.
2. Hang kettle on the hook assembly (Fig. 2), securely seating and
flush with the gears.
WARM: Turns the warming light on an off.
KETTLE: Turns the kettle on an off.
STIR: Automatically stirs the kettle.
Fig. 1
Fig. 2
Initial Setup Instructions
Controls Accessories
Salt 1 tbsp Kernel Popcorn
shaker measure scoop scoop
1. Set popcorn popper on a level, dry surface. Gently squeeze the sides of the Olde Midway
front metal panel to detach, then remove all packing material and wipe inside of kettle and
popper with a dry cloth. (Fig. 1) DO NOT use harsh cleaners or abrasive chemicals. After the
initial setup, maintain a regular care and maintenance plan.
2. Hang kettle on the hook assembly (Fig. 2), securely seating and flush with the gears.
Note: Kettle roller arm should be facing the popcorn machine door.
3. Connect the power plug from the bottom of the kettle into the outlet on the machine’s
ceiling. Note: Never plug this cord directly into an electrical outlet.
4. Slide the door posts into the hinge holes attached to the unit’s frame.