It is recommended that the machine and kettle be cleaned after each use
when the popper has cooled. However, waiting to clean after a few popping
sessions is acceptable.
• Make sure all controls (WARM, STIR, KETTLE) are OFF and the
popcorn machine is unplugged and cool.
• Clean all surfaces with a dry or damp cloth or sponge. NEVER
immerse the kettle or any other part of the machine in water.
• Do not use abrasive chemicals or cleaners on any part of
the machine
• Clean and dry thoroughly before any extended storage
period.
Advance Kettle Cleaning Technique
1. After the machine has completely cooled for several hours add up to 3/4 cup
of hot water (no detergents) into the kettle.
2. Place a towel in the bottom of the unit with a large bowl on top (make sure
bowl is large enough to collect all water from the kettle).
3. Turn on STIR and KETTLE, then bring water to boil for 1 to 2 minutes.
4. Turn off stirrer and heater and carefully pour out water into bowl.
CAUTION: Kettle and water will be HOT!
5. Repeat 2 to 3 times for best results.
To Next Page
Loading...
