This document is an instruction manual for the Olde Midway Hot Dog Roller, available in two models: PRO18 and PRO30.
Function Description:
The Olde Midway Hot Dog Roller is a machine designed for cooking hot dogs by continuously rolling them on heated rollers. It is intended for adult use only and should not be used for purposes other than its intended function. The machine features a glass shield assembly to protect the hot dogs and maintain temperature, consisting of side glass panels, a curved front shield, and a trim plate. The rollers are heated, and the temperature can be controlled to cook hot dogs efficiently.
Important Technical Specifications:
The manual provides specifications for both models:
- Model PRO18:
- Temperature Range: 0-250°
- Electric Voltage: 120V
- Number of Rollers: 7
- Capacity: Maximum 18 hot dogs
- Control Dials: FRONT dial controls the front 4 rollers, BACK dial controls the rear 3 rollers.
- Model PRO30:
- Temperature Range: 0-250°
- Electric Voltage: 120V
- Number of Rollers: 11
- Capacity: Maximum 30 hot dogs
- Control Dials: FRONT dial controls the front 6 rollers, BACK dial controls the rear 5 rollers.
Both models operate on 120V and have a temperature range of 0-250°.
Usage Features:
- Assembly: The manual provides detailed assembly instructions for the glass shield. This involves locating and removing screws, positioning glass mounts, inserting side glass panels, placing the curved glass shield, and securing the trim plate with bolts and nuts. Users are warned not to overtighten bolts to prevent glass cracking.
- Operation:
- Preparation: Before first use, a small amount of vegetable oil should be applied to the roller surfaces.
- Power On: Press the power switch to ON. An indicator light will glow when the machine has power and will turn off once the set temperature is reached. The machine heats up quickly.
- Temperature Control: Adjust the temperature controllers. Lower temperatures are recommended initially until cooking times are understood. The PRO18 model has two dials: one for the front 4 rollers and one for the rear 3. The PRO30 model also has two dials: one for the front 6 rollers and one for the rear 5.
- Loading Hot Dogs: Hot dogs should be placed between the rollers using tongs or other utensils, as the rollers become hot.
- Cooking Time: Hot dogs are typically ready in approximately 15 minutes, though this can vary based on cooking temperature, hot dog diameter, and starting temperature (frozen hot dogs may take longer).
- Removal: Hot dogs must be removed using tongs or other utensils; direct hand contact is strictly prohibited due to high temperatures.
- Power Off: After use, press the power switch to OFF.
- Unplugging: Unplug the machine from the wall outlet and allow it to cool completely before touching.
- Safety Precautions:
- Misuse can result in serious injury or death.
- Not a toy; for adult use only.
- Do not use for purposes other than intended.
- Do not modify the machine.
- Must be used on a grounded outlet.
- Do not immerse in water.
- Do not clean with detergent or abrasive chemicals.
- Take proper safety precautions.
- Keep body, hair, jewelry, and clothes away from moving parts.
- Use only 3-prong grounded extension cords that meet or exceed electrical rating.
- Always switch power off before unplugging.
- Do not touch hot rollers with bare hands.
Maintenance Features:
- Cleaning:
- Wipe down rollers and the removable drip tray with a damp, soft cloth.
- Do not immerse the machine or use excessive water.
- Avoid abrasive cleaners or metal scrubbers on any surface.
- Storage: Allow the machine to dry completely before storing.
The manual also includes a "Parts & Wiring Diagram" which lists the components of the glass shield and provides a visual representation of the hotdog roller components and its circuit diagram. It emphasizes inspecting all components before use and not attempting to use the machine if any parts are damaged or missing.
Need help?
General
To Next Page
