OLDE MIDWAY SPIN1400 - First-Time Setup Procedure; Initial Cleaning and Preparation; Machine Placement and Power Connection

Page 3
1. Wipe the pan and floss head with a damp clean cloth and dry
thoroughly. Do not clean with detergent or abrasive chemicals.
2. Place the cotton candy machine on a flat stable surface. The
machine operates at very high speeds making stability essential.
3. Plug the machine into a grounded outlet that meets the
requirement of the machine. Avoid using electrical extension cords
and outlet adapters, if possible.
FIRST-TIME SET UP PROCEDURE
Pan
Floss Head
Voltage Meter
Fuse
Heat Control
Switch
Power
Switch