YEAR? MM/DD/XX
Set the yearjust as
you
set the month and day.
If
a valid
date is entered, the display will automatically exit to the
date mode and display the day of the week, the
month
and the date. If an invalid date is entered, the display
will
return
to
MONTH?
XX/DD/YY and you'll need to
repeat the above steps.
After a battery reconnect (loss of power), the display
will
read CONFIRM TIME AND DATE.
RECALL
When you press the RCL
button, the system scrolls
through any currently active
warning messages, then
returns
to
the mode the
system was
in
before
you
pressed
RCL.
If
no warning messages exist, MONITORED
SYSTEMS
OK
will
be displayed.
2-79
To Next Page
Loading...
