PROG (Program):
Press to play the other side of the
tape.
TAPE/CD:
If you have
a
tape inserted and the radio is
playing, press TAPE/CD to play your tape. To return to
the
radio while the tape is playing, press
AM/FM.
You
can also press TAPE/CD to switch between
a
tape and
a
compact disc if both are inserted. While the tape or
CD
is
not
being played
it
will remain safely inside the radio
for future listening.
EJECT
Press to eject the cassette tape. The radio will
then play.
To
Play
a Compact Disc
The CD player will play either normal-size discs or the
smaller
8 cm discs without an adapt€
With the ignition on, insert
the
disc partway into the
slot, with the label side up. The player should pull
it
in
and it will begin playing.
Note that when the disc is inserted, “CD’ will be
displayed. When
the
disc is playing,
a
box
will
appear
around “CD’
in
the display. If
you
select
a
tone setting for
your CD,
it
will be activated each time you play
a
CD.
As
each new track starts to play, the track number will
appear
in
the display.
If “Err” or
“E’
and a number appear on the display at
any time, an error has occurred. See “Cassette Tape and
CD Errors” later in this section.
SEEK
A/V:
When you press SEEK while playing
a
CD,
it
will go back
to
the start of the current track if
more than eight seconds have played. When you press
SEEK
A
it will search for the next higher track and stop.
SCAN:
When you press SCAN while playing
a
CD,
you’ll
hear
the
first few seconds of each selection. Press
SCAN again to stop on
a
selection.
The
CD will be
muted while scanning and “SCAN” will appear on the
display.
FWD (Fast Forward):
To
advance
a
CD, press and
hold this button. While the CD advances, elapsed time
will be displayed
to
help you find
the
desired passage.
REV (Reverse):
To
reverse
a
CD, press and hold
this
button. While
the
CD reverses, elapsed time will be
displayed to help you find the desired passage.
To Next Page
Loading...
