If
“Err“ or
“E”
and a number appear
on
the display at
any time, an error has occurred. See “Cassette Tape and
CD Errors” later in this section.
NR
(Noise Reduction):
This radio has Dolby@B Noise
Reduction to reduce background noise on Dolby@B
encoded tapes. Press this button to reduce background
noise on your tape. The Dolby symbol
00
will appear
in the display. Dolby@ Noise Reduction is manufactured
under license from Dolby Laboratories Licensing
Corporation. Dolby@ and the
00
symbol are
trademarks
of
Dolby Laboratories Licensing
Corporation.
SEEK
A/V:
When you press SEEK while playing
a
tape,
it
will search for
the
next
higher or lower selection
and stop. There must be at least a four-second gap
between selections
on
the tape.
SCAN:
When
you
press SCAN while playing
a
tape,
you’ll
hear the first few seconds
of
each selection. Press
SCAN again to stop
on
a selection. The tape will be muted
while scanning and
“SCAN” will appear on the display.
FWD
(Fast Forward):
Press
to
advance a cassette tape
rapidly; press again to play the tape.
REV (Reverse):
Press
to
reverse a cassette tape rapidly;
press again to play the tape.
PROG (Program):
Press to play the other side of the
tape.
TAPEKD:
If you have a tape inserted and
the
radio
is
playing, press TAPE/CD to play your tape.
To
return to
the radio while the tape is playing, press
AM/FM.
The
tape will remain safely inside the radio for future
listening.
EJECT:
Press to eject
the
cassette tape. The radio
will
then play.
~-
3-17
To Next Page
Loading...
