The third fuse panel is located on the left side of the
instrument panel.
To
open
it,
simply pull on the latch
and the door will open.
You’ll find
a fuse puller clipped to the inside of the
cover. Place the wide end of the fuse puller over the
plastic end
of
the fuse. Squeeze the ends over
the
fuse
and pull
it
out.
To
close the fuse door, press the door
closed and
it
will
latch.
Two spare fuses are located below the fuse puller. You’ll
also find spare fuses
in
the slots labeled “Spare” on the
following charts.
Look
at the silver-colored band inside the
fuse.
If the
band is broken or melted, replace the fuse. Be sure you
replace a bad fuse with a new one of the correct amp
rating.
6-55
To Next Page
Loading...
